Dyson DC19T2I Vacuum Cleaner manual

The Dyson DC19T2I is a powerful bagless vacuum cleaner designed for efficient cleaning on various surfaces. It features advanced cyclone technology for strong suction, a washable HEPA filter for allergen capture, and a compact design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Bagless design, advanced cyclone technology, washable HEPA filter, ergonomic handle, and various cleaning attachments.

FeatureDescription
Bagless designNo need for replacement bags; easy to empty dust bin.
Advanced cyclone technologyMaintains strong suction power while capturing fine dust and allergens.
Washable HEPA filterCaptures allergens and can be washed for easy maintenance.
Ergonomic handleDesigned for comfortable use and easy maneuverability.
Various attachmentsIncludes crevice tool, dusting brush, and upholstery tool for versatile cleaning.

Installation

Unpack the vacuum and inspect contents. Ensure all parts are included.

  1. Attach the handle: Align and push the handle into the main body until it clicks.
  2. Connect accessories: Attach desired cleaning tool to the hose or wand.
  3. Plug in the vacuum: Ensure the power cord is securely connected to an outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and features.

  1. Check dust bin: Ensure it is empty and properly attached.
  2. Adjust height settings: Set the appropriate height for your flooring type.
  3. Test suction: Turn on the vacuum and check for proper suction power.

CAUTION! Do not operate the vacuum without the dust bin or filter in place.

Specifications

Controls and Settings

Power button located on the main body; suction control dial for adjusting power based on surface type.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

  1. Align the accessory with the hose or wand.
  2. Push firmly until it clicks into place.
  3. To remove, press the release button and pull the accessory off.

Tip: Use the appropriate attachment for the surface you are cleaning for optimal results.

Operating the Vacuum

To start cleaning, press the power button and adjust the suction as needed.

  1. Begin vacuuming: Move the vacuum back and forth across the surface.
  2. Use attachments for corners and edges.
  3. Empty the dust bin when full: Press the release button and empty into a trash bin.

WARNING! Do not use the vacuum on wet surfaces or to pick up liquids.

Maintenance and Care

Regular maintenance is essential for optimal performance.

  1. Clean the filter: Wash the HEPA filter every 1-3 months.
  2. Check for blockages: Inspect hoses and attachments for clogs.
  3. Store properly: Keep the vacuum in a dry place when not in use.

CAUTION! Ensure the vacuum is unplugged before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For support, visit www.dyson.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord issueCheck power connection and outlet.
No suctionClogged hose or full dust binInspect for blockages and empty dust bin.
Filter needs cleaningIndicator light onWash the HEPA filter as per instructions.
Strange noiseForeign object in vacuumTurn off and inspect for obstructions.

Reset: If issues persist, refer to the manual for reset instructions.

Service: For further assistance, contact Dyson customer service.

Dyson DC19T2I Vacuum Cleaner manual © - All Rights Reserved 2026