Dyson DC19T2 Vacuum Cleaner Manual

The Dyson DC19T2 is a powerful bagless vacuum cleaner designed for efficient cleaning on various surfaces. It features Dyson's patented Root Cyclone technology, ensuring no loss of suction, and comes equipped with a range of tools for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Bagless design, Root Cyclone technology, HEPA filtration, various cleaning tools.

Feature	Description
Root Cyclone technology	Ensures no loss of suction
HEPA filtration	Captures allergens and fine dust
Telescopic wand	Adjustable for different cleaning heights
Various tools	Includes crevice tool, dusting brush, and upholstery tool
Easy empty bin	Hygienic bin emptying without touching dirt

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle: Align and push until it clicks into place.
Connect the hose: Insert the hose into the main body until it locks.
Attach the desired tool: Fit the tool onto the end of the hose.
Plug into AC power.

WARNING! Ensure the vacuum is off before connecting or disconnecting parts.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check the bin: Ensure it is empty and properly attached.
Adjust the height: Use the height adjustment feature for optimal cleaning.
Test suction: Turn on the vacuum and check for proper suction.
Familiarize with tools: Practice using each tool for different surfaces.

CAUTION! Do not use on wet surfaces; ensure the vacuum is dry before use.

Specifications

Model: Dyson DC19T2.
Type: Bagless vacuum cleaner.
Filtration: HEPA filter.
Power: 1200W motor.
Weight: 7.5 kg.
Cord Length: 5 meters.
Bin Capacity: 2 liters.
Operating Radius: 10 meters.

Controls and Settings

Access controls on the main body: Power button, suction control, and height adjustment.

Remote: Not applicable for this model; all controls are manual.

Adjust suction for different surfaces: Use the suction control dial for optimal performance.

Connecting Accessories

Tools: Attach tools to the end of the hose for various cleaning tasks.

Turn off the vacuum before changing tools.
Align the tool with the hose and push until it clicks.
To remove, press the release button and pull the tool off.

Tip: Use the appropriate tool for the surface being cleaned for best results.

Operating the Vacuum

To operate, simply press the power button and adjust the suction as needed.

Power on: Press the power button located on the main body.
Adjust height: Set the height according to the surface type.
Start cleaning: Move the vacuum back and forth over the area to be cleaned.
Empty bin: When full, press the bin release button and empty into the trash.

WARNING! Do not block the suction inlet; check for clogs regularly.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filter: Wash the HEPA filter every 1-3 months.
Check for blockages: Inspect hoses and tools for clogs.
Empty the bin: Regularly empty the bin to maintain suction.
Inspect the cord: Check for any damage to the power cord.

Regulatory Information

This vacuum cleaner complies with all relevant safety standards and regulations. For support, visit www.dyson.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No suction	Blocked hose/bin full	Check for blockages; empty the bin.
Overheating	Clogged filter	Clean or replace the filter.
Strange noise	Foreign object in vacuum	Turn off and check for obstructions.
Power issues	Faulty cord or outlet	Check the power cord and try a different outlet.

Reset: Unplug for 30 seconds to reset the vacuum.

Service: For assistance, contact Dyson customer service.